Teltonika RUT241233000 - RUT241 - eSIM (Global Version)

NEW ITEM!

In Stock

Teltonika RUT241233000 - RUT241 eSIM (Global Version) Industrial LTE WiFi Cellular Router with Digital IO With Universal PSU

Write a review

Price: $229.00 $229.00

Quantity

Add To Wish List

The Teltonika RUT241233000 is a compact industrial 4G LTE Cat 4 router designed for reliable global IoT, M2M, automation, retail, transportation, security, energy, utility, and remote-site connectivity. Its rugged industrial design combines cellular, Ethernet, and Wi-Fi networking with automatic WAN failover, digital input and output, advanced RutOS software, and Teltonika RMS remote management.

This Global RUT241 configuration adds SGP.22 consumer eSIM functionality alongside one physical Mini-SIM slot, allowing up to seven downloadable eSIM profiles to be managed through WebUI and Teltonika RMS. LTE Cat 4 provides theoretical speeds up to 150 Mbps download and 50 Mbps upload, with 3G and 2G fallback, while two Fast Ethernet ports and 2.4 GHz Wi-Fi 4 provide flexible local connectivity. RUT241233000 uses Teltonika's Global RUT241 23**** eSIM hardware and is supplied as the standard package with a Universal PSU.

Compatibility & Buying Information

RUT241233000 Global eSIM Version: This exact order code uses Teltonika's RUT241 23**** Global eSIM cellular configuration and is supplied as the standard package with a Universal PSU.

Global Cellular Bands: The RUT241233000 supports a broad selection of LTE, 3G, and 2G bands intended for multi-region deployment. Frequency support alone does not guarantee service activation, so carrier compatibility, local regulations, network bands, APN requirements, and SIM or eSIM provisioning should be confirmed before deployment.

Physical SIM + eSIM: The router combines one physical Mini-SIM slot with an integrated consumer-type eSIM based on the SGP.22 architecture. Up to seven eSIM profiles can be stored and managed through the router's WebUI or Teltonika RMS.

eSIM Service Required: Integrated eSIM hardware does not include an ongoing cellular subscription. A compatible operational eSIM profile and mobile-data plan must be obtained from a supported carrier or service provider.

LTE Cat 4 Performance: Teltonika specifies theoretical LTE speeds up to 150 Mbps download and 50 Mbps upload. Actual throughput depends on network coverage, supported bands, signal quality, carrier configuration, congestion, antennas, and service plan.

Fast Ethernet: The RUT241 provides two 10/100 Mbps Ethernet ports rather than Gigabit Ethernet. Because LTE Cat 4 can theoretically exceed 100 Mbps download, the Ethernet interface may limit peak wired throughput under favorable cellular conditions.

Wi-Fi 4: Integrated 2.4 GHz Wi-Fi supports Access Point and Station modes, up to 50 simultaneous clients, Mesh, Fast Roaming, BSS Transition Management, Radio Resource Measurement, hotspot functionality, and WPA3-capable RutOS security.

External Antennas: The RUT241 provides two SMA connectors for mobile antennas and one RP-SMA connector for Wi-Fi. Cellular SMA and Wi-Fi RP-SMA connections should not be interchanged.

Digital I/O: One digital input and one open-collector digital output are integrated into the 4-pin power connector for alarms, sensors, relays, automation, and remote-monitoring applications.

Passive PoE: LAN1 can power the RUT241 using compatible 9–30 VDC passive PoE in Mode B over the spare Ethernet pairs. This is not IEEE 802.3af, 802.3at, or 802.3bt active PoE, so source voltage, polarity, and pinout must be verified before connection.

Low Power Consumption: Current Teltonika testing shows approximately 1.05–1.10 W at idle without a SIM and roughly 3.24–3.31 W under its documented high-load scenario, making the RUT241 useful for low-power industrial and remote installations.

Universal PSU Included: RUT241233000 is specifically the Global eSIM standard package with Teltonika's 9 W Universal PSU. Other RUT241 23**** order codes use EU, US, AU, JP, or mass-packing configurations.

TPM Configuration: Teltonika documentation identifies TPM 2.0 availability on certain RUT241 hardware configurations. Buyers requiring TPM should confirm that capability for the exact ordered hardware rather than assuming it is included solely from the RUT241 model name.

Remote Management: Teltonika RMS can be used to remotely monitor, configure, update, and access compatible RUT241 installations and can also simplify eSIM profile management across distributed device fleets.

Best Fit: The RUT241233000 is a strong choice for global industrial IoT, retail, kiosks, utilities, automation, transportation, security, telemetry, remote monitoring, and managed deployments that need compact LTE connectivity with physical SIM plus eSIM flexibility, Ethernet, Wi-Fi, digital I/O, and centralized remote management.

Interactive 3D Product View

Drag to rotate the RUT241 and scroll or pinch to zoom.

Product Video