Teltonika RUT360100100 - RUT360 4G LTE CAT 6 Router

• Teltonika RUT360 industrial LTE Cat 6 router
• Exact North American order code RUT360100100
• Standard package with US power supply
• LTE Cat 6 with carrier aggregation
• Cellular data rates up to 300 Mbps under supported network conditions
• North American LTE-FDD bands B2, B4, B5, B7, B12, B13, B25, B26, B29, B30, and B66
• North American 3G bands B2, B4, and B5
• AT&T, Verizon, T-Mobile, and UScellular carrier certifications
• 1 x external Mini-SIM slot
• 2 x 10/100 Mbps Fast Ethernet ports
• 1 x WAN port configurable as LAN
• 1 x LAN Ethernet port
• Automatic mobile, wired, and Wi-Fi WAN failover
• Load-balancing support
• 2.4 GHz IEEE 802.11b/g/n Wi-Fi 4
• 2x2 MIMO wireless architecture
• Access Point and Station wireless modes
• Wireless mesh and fast-roaming capabilities
• 2 x SMA LTE antenna connectors
• 2 x RP-SMA Wi-Fi antenna connectors
• 2 x configurable digital input/output pins
• QCA9531 MIPS 24Kc 650 MHz processor
• 128 MB DDR2 RAM
• 16 MB SPI flash storage
• Advanced VPN, routing, firewall, VLAN, QoS, hotspot, and network-management functions
• Modbus TCP, MQTT, and Data to Server capabilities
• Teltonika RMS remote-management compatibility
• 9–30 VDC industrial power input
• Maximum rated device power consumption of 10.5 W
• Rugged aluminum housing
• -40°C to +75°C operating temperature
• IP30 ingress-protection rating
• No GNSS/GPS receiver
• No passive or active PoE input

• Industrial IoT connectivity
• Remote equipment monitoring
• Factory and process automation
• PLC and controller connectivity
• SCADA and telemetry networks
• Utility and energy infrastructure
• Renewable-energy installations
• Primary LTE WAN connectivity
• Cellular backup for wired networks
• Carrier-aggregation applications
• AT&T cellular deployments
• Verizon cellular deployments
• T-Mobile cellular deployments
• UScellular deployments
• Retail and point-of-sale systems
• Kiosks and unattended equipment
• ATM and payment infrastructure
• Digital signage networks
• Security and surveillance networks
• Access-control systems
• Transportation infrastructure
• Industrial VPN gateways
• Wi-Fi hotspot applications
• Remote Modbus TCP and MQTT applications
• MSP-managed customer networks
• RMS-managed distributed equipment
• Applications requiring Cat 6 cellular speeds in a compact industrial router

• 1 x Teltonika RUT360 North American LTE Cat 6 Router
• 1 x US Power Supply
• 2 x LTE Antennas, Swivel, SMA Male
• 2 x Wi-Fi Antennas, Swivel, RP-SMA Male
• 1 x Ethernet Cable, 1.5 m
• 1 x SIM Adapter Kit
• 1 x Quick Start Guide
• 1 x Packaging Box

Exact Order Code: This page is for Teltonika RUT360100100, the North American RUT360 standard package supplied with a US power supply. RUT360000000 is the corresponding standard package for the other published regional radio configuration.

North American Cellular Version: RUT360100100 belongs to Teltonika's RUT360 1***** North American radio family and supports LTE-FDD bands B2, B4, B5, B7, B12, B13, B25, B26, B29, B30, and B66 plus 3G bands B2, B4, and B5.

Carrier Certifications: Teltonika documents carrier certification for AT&T, Verizon, T-Mobile, and UScellular on RUT360 1***** hardware. Carrier approval does not automatically guarantee compatibility with every MVNO, APN, private cellular network, or service plan, so the intended carrier configuration should be verified before deployment.

LTE Cat 6 & Carrier Aggregation: RUT360's LTE Cat 6 modem supports carrier aggregation and theoretical cellular rates up to 300 Mbps. Actual performance depends on carrier aggregation availability, LTE bands, signal conditions, network congestion, antenna placement, and the selected data plan.

Single Physical SIM: RUT360 contains one external Mini-SIM slot. It does not provide the dual-SIM failover functionality found on products such as RUT951 and RUT956.

Two Fast Ethernet Ports: RUT360 provides two 10/100 Mbps Ethernet interfaces. One operates as WAN by default and can be configured as LAN, while the second is the LAN interface. The Ethernet ports are not Gigabit.

2.4 GHz Wi-Fi 4: The integrated 802.11b/g/n radio supports 2x2 MIMO using two external RP-SMA Wi-Fi antennas. It operates on 2.4 GHz and does not provide 5 GHz Wi-Fi.

300 Mbps Wi-Fi vs. 100 Mbps Ethernet: The 802.11n radio can negotiate theoretical wireless rates up to 300 Mbps with its two-antenna configuration, while each physical Ethernet interface is limited to 100 Mbps. Wireless link rate should therefore not be interpreted as guaranteed end-to-end internet throughput.

Automatic WAN Failover: RutOS supports mobile, wired Ethernet, and Wi-Fi WAN connections as available backup sources. This allows the router to switch between configured connectivity options when the primary path becomes unavailable.

Two Configurable I/O Pins: Pins 3 and 4 of the four-pin power connector can be configured for digital-input or open-collector-output operation, allowing external equipment monitoring and low-power control functions.

No GNSS or GPS: RUT360 does not contain an integrated GNSS receiver or dedicated GNSS antenna connector. Applications requiring onboard GPS, GLONASS, Galileo, BeiDou, geofencing, or location reporting should use a suitable GNSS-equipped Teltonika router instead.

No Passive PoE Input: Unlike RUT241, RUT300, RUT951, RUT955, and several other Teltonika routers, RUT360 is not listed with passive LAN1 powering. Teltonika specifies power through the four-pin 9–30 VDC socket.

No Active PoE: RUT360 also does not provide IEEE 802.3af/at PoE input or PoE output. Do not plan to power the router directly from a PoE switch unless a separate suitable PoE splitter or power-conversion solution is used.

US Power Supply Package: The RUT360100100 order code identifies the North American standard package with US PSU. Teltonika documentation from different package revisions has shown different PSU wattage specifications, so installations that depend on the exact supplied adapter rating should verify the physical NTS stock rather than assuming an older package revision.

Power Requirements: The router itself accepts 9–30 VDC through its four-pin industrial socket. When substituting another power source, use a properly regulated supply with sufficient capacity for the router and follow Teltonika's polarity and surge-protection requirements.

RMS Support: RUT360 supports Teltonika Remote Management System for centralized monitoring, configuration, troubleshooting, firmware management, and remote-access workflows. Applicable RMS Management resources are separate from the router purchase.

Advanced RutOS Services: RUT360 supports professional routing, VPN, VLAN, firewall, hotspot, Modbus TCP, MQTT, SMS, failover, load balancing, and remote-management functionality through RutOS.

Mounting: RUT360 supports DIN-rail installation with the applicable Teltonika DIN-rail mounting accessory and can also be placed on a flat surface. The DIN-rail kit is not listed as part of the verified standard package.

IP30 Enclosure: The aluminum housing is rated IP30 and should be installed in a protected industrial, commercial, or equipment environment rather than directly exposed to rain, water, or outdoor weather.

RUT360 vs. RUT241: RUT360's key advantage is LTE Cat 6 with carrier aggregation and cellular speeds up to 300 Mbps, while RUT241 uses LTE Cat 4. Both are compact routers with Fast Ethernet and 2.4 GHz Wi-Fi, but their radio, antenna, I/O, and powering architectures differ.

Best Fit: Teltonika RUT360100100 is a strong fit for North American industrial IoT, automation, retail, security, utilities, telemetry, transportation, remote monitoring, MSP-managed networks, and distributed systems that need compact LTE Cat 6 connectivity with carrier aggregation, Ethernet, Wi-Fi, configurable I/O, VPN services, and RMS management.