Teltonika RUT951A10P00 - RUT951 PoE+ with PSU (All Carriers) Dual SIM LTE Router with IO and Ethernet

In Stock

Teltonika RUT951A10P00 - RUT951 PoE+ (All Carriers) Dual SIM LTE Router with IO and Ethernet

Write a review

Price: $359.00

Quantity

Add To Wish List

The Teltonika RUT951A10P00 RUT951 PoE+ is an industrial LTE Cat 4 cellular router designed for North American enterprise, industrial IoT, surveillance, retail, automation, smart-building, energy, utility, and remote-site networks that need cellular connectivity and active Power over Ethernet in one compact device. It combines dual physical SIM redundancy, Wi-Fi 4, four Fast Ethernet interfaces, industrial digital input and output, advanced RutOS networking, automatic WAN failover, Teltonika RMS remote management, and IEEE 802.3af/at PoE functionality for powering compatible downstream network equipment.

RUT951A10P00 uses Teltonika's North American RUT951 A***** cellular hardware with LTE-FDD bands B2, B4, B5, B12, B13, B14, B66, and B71 plus 3G bands B2, B4, and B5. LTE Cat 4 delivers theoretical speeds up to 150 Mbps download and 50 Mbps upload. Unlike the standard RUT951, the PoE+ version uses LAN1 as an IEEE 802.3af/at PoE input and provides active PoE output through LAN2, LAN3, and WAN, with up to 30 W per output port and a maximum 90 W total PoE budget when the router is supplied by a suitable high-capacity DC source.

Key Features

Industrial LTE Cat 4 cellular router with active PoE+
Order code RUT951A10P00
North American RUT951 A***** cellular configuration
LTE Cat 4 speeds up to 150 Mbps download and 50 Mbps upload
North American LTE-FDD bands B2, B4, B5, B12, B13, B14, B66, and B71
3G bands B2, B4, and B5
2 x physical Mini-SIM / 2FF slots
Automatic SIM switching and carrier failover
Consumer eSIM functionality available on applicable RUT951 PoE+ hardware
4 x 10/100 Mbps Ethernet ports
1 x WAN Ethernet port
3 x LAN Ethernet ports
LAN1 supports IEEE 802.3af/at active PoE input
LAN2, LAN3, and WAN support IEEE 802.3af/at active PoE output
Up to 30 W PoE+ output per PSE port
Up to 90 W total downstream PoE budget with appropriate DC input power
PoE passthrough capability when powered through compatible active PoE+
2.4 GHz Wi-Fi 4 IEEE 802.11b/g/n
Access Point and Station wireless modes
Supports up to 100 simultaneous Wi-Fi connections
Wi-Fi Mesh IEEE 802.11s support
Fast Roaming IEEE 802.11r support
BSS Transition Management IEEE 802.11v
Radio Resource Measurement IEEE 802.11k
WPA2 and WPA3 wireless security
1 x digital input
1 x digital output
Automatic WAN failover
Load balancing support
Advanced static and dynamic routing
Extensive VPN and firewall capabilities
Modbus TCP support
OPC UA Client and Server support
DNP3 and DLMS/COSEM support
MQTT and Modbus MQTT Gateway support
Data to Server functionality
RutOS operating system based on OpenWrt Linux
Teltonika RMS remote monitoring and management
9–57 VDC industrial DC input
48–57 VDC input range for PoE operation
US power adapter included with RUT951A10P00
Industrial aluminum housing with plastic panels
IP30 protection rating
Wide -40°C to 75°C operating temperature range

Compatibility & Buying Information

RUT951A10P00 North American Version: This exact order code uses Teltonika's RUT951 A***** cellular hardware for North America and is the standard package with a US power adapter.

North American Cellular Bands: RUT951A10P00 supports LTE-FDD bands B2, B4, B5, B12, B13, B14, B66, and B71 plus 3G bands B2, B4, and B5. NTS markets this model for broad North American carrier use, but carrier certification, frequency support, APN requirements, SIM provisioning, and service-plan compatibility should still be confirmed for the intended deployment.

LTE Cat 4: Teltonika specifies theoretical LTE speeds up to 150 Mbps download and 50 Mbps upload. Actual performance depends on carrier coverage, signal quality, available frequency bands, network congestion, service plans, antenna placement, and local radio conditions.

Active PoE — Not Passive PoE: The RUT951 PoE+ uses standards-based IEEE 802.3af/at active PoE. This is different from the passive PoE input used by the standard RUT951 and many other Teltonika industrial routers.

LAN1 Is the PoE Input: LAN1 is the powered-device port and can accept IEEE 802.3af or IEEE 802.3at power from a compatible PoE switch or injector.

Three PoE Output Ports: LAN2, LAN3, and WAN are IEEE 802.3af/at PSE ports and can power compatible cameras, access points, VoIP phones, sensors, access-control equipment, and other standards-compliant PoE endpoints.

90 W PoE Budget Requires Adequate Input Power: The advertised 90 W downstream PoE budget does not apply under every powering method. Teltonika specifies that full three-port PoE+ operation requires a sufficiently powerful DC source above 44 V and at least 100 W, with the device's PoE input specification listed at 48–57 VDC.

Included PSU & Full PoE Budget: The bundled RUT951 PoE+ power adapter is specified at 48 VDC / 1.3 A. Because that adapter does not provide the 100 W input capacity Teltonika specifies for the full 90 W downstream PoE budget, buyers who plan to use all three PoE output ports at high load should select a separate appropriately rated power source.

PoE Passthrough When Powered by PoE+: When LAN1 is powered from an IEEE 802.3at Type 2 PoE+ source, Teltonika specifies limited downstream PoE output of up to 15 W total on one IEEE 802.3af Type 1 port. Powering the router through IEEE 802.3af Type 1 does not provide downstream PoE output.

Four Fast Ethernet Ports: All four RJ45 interfaces operate at 10/100 Mbps rather than Gigabit Ethernet. This is sufficient for many LTE Cat 4, IoT, camera, access-control, and remote-network applications, but should be considered when designing high-throughput local networks.

Dual Physical SIM: Two Mini-SIM slots provide carrier redundancy and automatic switching based on conditions including weak signal, roaming, data limits, network availability, and connection failure.

eSIM Hardware Note: Teltonika markets the RUT951 PoE+ platform with consumer eSIM functionality supporting up to seven profiles, but its current physical-interface specification notes that eSIM is optional and requires the appropriate hardware version. If eSIM availability is required for a specific project, confirm the shipped hardware configuration before deployment.

Wi-Fi 4: Integrated 2.4 GHz IEEE 802.11b/g/n Wi-Fi supports Access Point and Station modes, Mesh, Fast Roaming, BSS Transition Management, Radio Resource Measurement, and up to 100 simultaneous wireless connections.

Industrial I/O: The 4-pin power connector provides one digital input and one digital output for compatible alarms, sensors, triggers, and remote-control applications.

No GNSS or USB: The RUT951 PoE+ does not provide the GNSS receiver, USB interface, or serial ports found on some larger Teltonika industrial router models. Buyers requiring those interfaces should select a different platform.

Mounting Hardware: DIN rail, wall, and flat-surface mounting are supported with compatible mounting accessories. Teltonika lists these mounting methods as requiring an additional mounting kit rather than including the hardware in the standard package.

Remote Management: Teltonika RMS can remotely monitor, configure, update, troubleshoot, and access compatible RUT951 PoE+ installations, helping MSPs, system integrators, enterprise IT teams, and industrial organizations manage geographically distributed networks.

Best Fit: The RUT951A10P00 is a strong choice for North American MSPs, security integrators, enterprise IT teams, industrial installers, retailers, utilities, smart-building deployments, and remote sites that need LTE Cat 4 connectivity, dual-SIM redundancy, Wi-Fi, industrial I/O, and standards-based PoE input and output in one compact cellular router.

Interactive 3D Product View

Drag to rotate the RUT951 PoE+ and scroll or pinch to zoom.

Product Video