Teltonika RUTX11100400 IS EOL, REPLACED with RUTX11300400

• Teltonika RUTX11 professional industrial cellular router
• Exact legacy North American order code RUTX11100400
• North American standard package with US 18 W power supply
• LTE Advanced Cat 6 with carrier aggregation
• Maximum LTE rates up to 300 Mbps download and 50 Mbps upload
• LTE-FDD bands B2, B4, B5, B7, B12, B13, B25, B26, B29, B30, and B66
• 3G bands B2, B4, and B5
• AT&T, Verizon, and T-Mobile certified North American hardware
• 2 x Mini-SIM slots with automatic SIM switching
• 4 x 10/100/1000 Mbps Gigabit Ethernet ports
• 1 x Gigabit WAN port configurable as LAN
• 3 x Gigabit LAN ports
• Dual-band 2.4 GHz and 5 GHz Wi-Fi 5
• IEEE 802.11ac Wave 2 with MU-MIMO
• Wireless data rates up to 867 Mbps
• Up to 150 simultaneous Wi-Fi connections
• Wireless mesh and fast-roaming support
• Bluetooth 4.0 Low Energy
• Integrated GNSS positioning
• GPS, GLONASS, Galileo, BeiDou, and QZSS support
• 2 x SMA mobile antenna connectors
• 2 x RP-SMA Wi-Fi antenna connectors
• 1 x RP-SMA Bluetooth antenna connector
• 1 x SMA GNSS antenna connector
• 1 x USB 2.0 Type-A host port
• 1 x digital input
• 1 x open-collector digital output
• Quad-core ARM Cortex-A7 717 MHz processor
• 256 MB DDR3 RAM
• 256 MB SPI flash storage
• Advanced VPN, firewall, VLAN, routing, failover, and load-balancing capabilities
• Teltonika RMS remote-management compatibility
• 9–50 VDC industrial power input
• 9–50 VDC passive Mode B power input through LAN1
• 16 W maximum rated power consumption
• Aluminum industrial housing
• -40°C to +75°C operating temperature
• IP30 ingress-protection rating

• Industrial LTE and IoT connectivity
• Primary cellular WAN deployments
• Cellular backup for wired networks
• Dual-SIM failover applications
• Enterprise branch connectivity
• Factory and process automation
• Remote equipment monitoring
• SCADA and telemetry networks
• Utility and energy infrastructure
• Renewable-energy installations
• Transportation and vehicle networking
• Passenger connectivity systems
• GNSS positioning and geofencing
• Security and surveillance networks
• Retail and point-of-sale systems
• Kiosks and unattended equipment
• ATM and payment infrastructure
• Digital signage systems
• Industrial VPN gateways
• Bluetooth sensor applications
• Dual-band Wi-Fi deployments
• Multi-WAN failover and load balancing
• MSP-managed customer locations
• RMS-managed remote infrastructure
• Replacement and maintenance of existing RUTX11 installations

• 1 x Teltonika RUTX11 North American Industrial LTE Router
• 1 x 18 W US Power Supply
• 2 x Mobile Antennas, Swivel, SMA Male
• 2 x Dual-Band Wi-Fi Antennas, Swivel, RP-SMA Male
• 1 x GNSS Antenna, Adhesive Mount, SMA Male, 3 m Cable
• 1 x Bluetooth Antenna, Magnetic Mount, RP-SMA Male, 1.5 m Cable
• 1 x Ethernet Cable, 1.5 m
• 1 x SIM Adapter Kit
• 1 x Quick Start Guide
• 1 x Packaging Box

Exact Legacy Order Code: This page is for Teltonika RUTX11100400, the earlier RUTX11 North American standard package supplied with a US 18 W power supply.

Direct RUTX11 Successor: Teltonika replaced the RUTX11 1***** North American hardware family with the newer RUTX11 3***** family beginning in November 2024. The direct newer US-package order code is RUTX11300400.

Why the Order Code Changed: Teltonika changed the RUTX11 cellular modem from Quectel EG06 to EG060K after the earlier modem platform was discontinued. This hardware change caused the North American order-code family to move from RUTX11 1***** to RUTX11 3*****.

Old vs. New North American Bands: RUTX11100400 supports LTE-FDD B2, B4, B5, B7, B12, B13, B25, B26, B29, B30, and B66 plus 3G B2, B4, and B5. RUTX11300400 expands the newer North American LTE configuration with B14, B71, and LTE-TDD B41/B48.

Carrier Certification: The North American RUTX11 hardware family is certified for AT&T, Verizon, and T-Mobile. Carrier certification does not automatically guarantee compatibility with every MVNO, APN, private cellular network, or account type.

LTE Cat 6: RUTX11100400 supports LTE Advanced Cat 6 with carrier aggregation and theoretical mobile rates up to 300 Mbps download and 50 Mbps upload. Actual performance depends on network conditions, available bands, carrier aggregation combinations, signal quality, antennas, and the selected data plan.

Dual Physical SIM: RUTX11100400 provides two Mini-SIM slots with configurable automatic switching for network loss, weak signal, roaming, data limits, connection failure, and other RutOS conditions.

Four Gigabit Ethernet Ports: RUTX11 provides four 10/100/1000 Mbps interfaces. One operates as WAN by default and can be configured as LAN, while the other three operate as LAN interfaces.

Dual-Band Wi-Fi 5: RUTX11 supports simultaneous 2.4 GHz and 5 GHz IEEE 802.11ac Wave 2 Wi-Fi with MU-MIMO and wireless data rates up to 867 Mbps.

Up to 150 Wi-Fi Clients: Teltonika specifies support for up to 150 simultaneous wireless connections. Actual usable capacity depends on traffic type, interference, channel utilization, client hardware, and network design.

Bluetooth LE: A dedicated RP-SMA Bluetooth antenna interface supports Bluetooth Low Energy applications such as compatible sensors and short-range industrial devices.

GNSS Included: RUTX11 includes a dedicated GNSS receiver and SMA antenna connection supporting GPS, GLONASS, Galileo, BeiDou, and QZSS functions for positioning and applicable location-based services.

Passive PoE Input: RUTX11 can receive 9–50 VDC through LAN1 using passive Mode B power over Ethernet.

Not IEEE Active PoE: The LAN1 passive power input is not compliant with IEEE 802.3af, 802.3at, or 802.3bt. Do not connect an incompatible standards-based PoE source without ensuring its output matches the router's supported passive-power requirements.

No PoE Output: RUTX11 can receive compatible passive power but does not supply PoE power to cameras, access points, phones, or other Ethernet endpoints.

RUTX11300400 Firmware Requirement: The replacement RUTX11 3***** hardware introduced with the EG060K modem does not support firmware versions below RUTX_R_00.07.08.3. Installers maintaining mixed old and new RUTX11 fleets should account for this when using standardized firmware images.

Later RUTX11 Hardware Revision: Teltonika introduced another RUTX11 hardware revision beginning in Q3 2025. Updated hardware requires RutOS RUTX_R_00.07.14 or newer, so current firmware should be used when deploying replacement stock.

USB Host: The USB 2.0 Type-A interface supports compatible storage and peripherals. The power requirements of attached USB devices should be considered when selecting an alternative DC power supply.

RMS Support: RUTX11 supports Teltonika Remote Management System for centralized monitoring, configuration, firmware management, troubleshooting, and remote-access workflows. Applicable RMS resources are separate from the router purchase.

Current RUTX-Series Lifecycle: Teltonika announced in August 2026 that the entire RUTX series is entering its end-of-life phase because the Qualcomm CPU platform used by the series is being discontinued.

Long-Term RUTX11 Replacements: While RUTX11300400 is the direct newer RUTX11 replacement for RUTX11100400, Teltonika now recommends RUTM11, RUTM16, or RUTC16 for new deployments requiring a longer-term successor platform.

Existing Installations: Existing RUTX11 units remain usable and Teltonika continues support through its published RUTX-series EOL transition. Replacement decisions should consider required cellular bands, existing configurations, VPN performance, Bluetooth requirements, and long-term deployment plans.

Mounting Accessories: DIN-rail, wall, and flat-surface mounting require the applicable additional mounting kit and are not listed as part of the standard RUTX11100400 package.

IP30 Enclosure: RUTX11 should be installed in a protected industrial or commercial environment and should not be directly exposed to rain, water, or outdoor weather without a suitable enclosure.

Best Fit: RUTX11100400 is primarily relevant for maintaining, replacing, or matching existing North American RUTX11 installations that require LTE Cat 6, dual SIM, Gigabit Ethernet, dual-band Wi-Fi 5, Bluetooth LE, GNSS, VPN services, and RMS management. For new long-term deployments, evaluate the newer Teltonika replacement platforms alongside remaining RUTX11 inventory.